With these mountings, you can easily hang your Acrylic and Metal Prints to the wall.
Couple (Our tip)
Bring your photos into the limelight with this mounting system. The fixture “Couple” is simply stuck onto the back of the photo and creates a “floating” effect.
Attention: With brighter images the fixings may shine through. Alternative mountings: “Steel 20” with drill holes.
- 4-part set incl. 2 mounts & 2 spacers
- Holds up to 6 kg (approx. 120 x 90 cm on 3 mm)
- “Floating” effect
- Distance from wall: 10 mm
Download PDF manual
£12.95
Harry (3 mm)
The high-quality stainless steel mount is elegant and modern at the same time. The fixture is secured with drill holes in the wall and is therefore a stable and safe alternative for heavier photo products.
- 3 mm
- 4-part set incl. screws
- Suitable for all sizes
- High-quality stainless steel fixing
- Diameter & distance from wall: 15 mm
Download PDF manual
£23.80
Harry (8 mm)
The high-quality stainless steel mount is elegant and modern at the same time. The fixture is secured with drill holes in the wall and is therefore a stable and safe alternative for heavier photo products.
- 3 mm
- 4-part set incl. screws
- Suitable for all sizes
- High-quality stainless steel fixing
- Diameter & distance from wall: 15 mm
Download PDF manual
£23.80
Steel 20
The high-quality stainless steel mount is elegant and modern at the same time. The fixture is secured with drill holes in the picture and is therefore a stable and safe alternative for heavier photo products.
- 4-part set incl. screws
- Suitable for all sizes
- High-quality stainless steel fixing
- Diameter & distance from wall: 20 mm
Download PDF manual
£18.95
Hanging your photo collage - 5 easy steps
What you need
For hanging your print you need: mountings, drilling machine (or hammer), spirit level and a pencil.
1. Attach mountings
The mountings have to be glued or screwed on the photo. (Check the attached manual!)
2. Mark drilling holes
Mark the drilling holes and use a spirit level.
3. Drill holes
Drill the holes at the marked spots on the wall and attach the mountings.
4. Hang print
Now just hang the print on the fixings in the wall.
5. Hooray!
Congratulations: If you still got all you fingers you can give yourself a well deserved High Five.